Publications List
Publication List of Biomedical Engineering Department
JOURNAL:
1. Md Enamul Hoque et el. “Biomedically vibrant and cost-effective biocomposite bone platedevelopment and testing”. ‘Hybrid Advances’ (Elsevier).
2. Md Enamul Hoque et el. “Effects of systemic challenges on agricultural development systems: a systematic review of perspectives”. ‘Cogent Food & Agriculture’ (Taylor & Francis)
3. Md Asadur Rahnam et el. “Development of CNN-based Decision Support System for Lung Disease Diagnosis Using Chest Radiographs” AIP Advances
4. Md Asadur Rahnam et el “Lung-AttNet: An Attention Mechanism based CNN Architecture for Lung Cancer Detection with Federated Learning” IEEE Access
5. Md.Tobibul Islam et el. Metamaterial Wave Absorber using quasi-rectangular symmetric split ring resonators for harvesting energy in visible, UV-A, and UV-C regions. Heliyon
6. Md Enamul Hoque, Asif Mahmud Rayhan “Jute Fiber Reinforced Biocomposite: Towards Developing Composite Bone Plate” IOP Conference Series: Materials Science and Engineering.
7. Md Enamul Hoque et el. “Biochar in global carbon cycle: Towards sustainable development goals”. Current Research in Green and Sustainable Chemistry. Elsevier
8. Md Enamul Hoque et el. “Unleashing the promise of emerging nanomaterials as a sustainable platform to mitigate antimicrobial resistance”. RSC Advances.
9. Enock Siankwilimba, Chisoni Mumba, Bernard Mudenda Hang’ombe,Joshua Munkombwe,Jacqueline Hiddlestone-Mumford, Munyaradzi A. Dzvimbo & Md Enamul Hoque “Bioecosystems towards sustainable agricultural extension delivery: effects of various factors” Environment, Development and Sustainability
10. Md Enamul Hoque, Sadia Mannan Shanta, Rhythem Tahrin, Saem Chowdhury, Zarin Tasnim, Md Abdul Alim Shuvo, Shifat Al Hasnayeen Riham “A benign way of measuring hemoglobin in blood – Towards developing a non-invasive technique” Hybrid Advances
11. Adib Bin Rashid, Md Enamul Hoque, Nahiyan Kabir, Fahim Ferdin Rifat, Hasin Ishrak, Abdulrahman Alqahtani, Muhammad EH Chowdhury “Synthesis, Properties, Applications, and Future Prospective of Cellulose Nanocrystals”
12. Md Enamul Hoque et el. “Sustainability of agriculture extension services in the face of COVID19: A study on gender-specific market systems”
13. Adib Bin Rashid, Shariful Islam Shishir, Md Azim Mahfuz, Md Tanvir Hossain, Md Enamul Hoque, Md Enamul Hoque. “Silica Aerogel: Synthesis, Characterization, Applications, and Recent Advancements”
14. Md Enamul Hoque, Shifat Al Hasnayeen Riham, Md Abdul Alim Shuvo.A cost effective prosthetic leg: Design and development”
15. Rubel Alam, Shah Alimuzzaman, Abdus Shahid, Fahmida-E- Karim, Md Enamul Hoque. “Collagen/Nigella Sativa/Chitosan Inscribed Electrospun Hybrid Bio-Nanocomposites for Skin Tissue Engineering”
16. Md Zillur Rahman, Maliha Rahman, Tariq Mahbub, Md Ashiquzzaman, Suresh Sagadevan, Md Enamul Hoque. “Advanced biopolymers for automobile and aviation engineering applications”
17. Huaizhong Xu, Shinichi Yagi, Sherry Ashour, Lei Du, Md Enamul Hoque, Lin Tan. “A Review on Current Nanofiber Technologies: Electrospinning, Centrifugal Spinning, and ElectroCentrifugal Spinning”
18. Adib Bin Rashid, Nazmir-Nur Showva, Md Enamul Hoque. “Gelatin-Based Scaffolds–An Intuitive Support Structure for Regenerative Therapy”
19. Shashank Shekhar, Md Enamul Hoque, Pramendra Kumar Bajpai, Habibul Islam, Bhasha Sharma. “Chemical upcycling of plastics as a solution to the plastic trash problem for an ideal, circular polymer economy and energy recovery. Environment, Development and Sustainability”
20. Faris M AL-Oqla, Mohammed Hayajneh, Md Enamul Hoque. “Structural Integrity and Performance of a Novel Chemically Treated Cellulosic Paper Corn/Polyester Sustainable Biocomposites”
21. Md Enamul Hoque, Mirajul Alam Sarker, Kiswa Arif, M. Azam Ali, Tarek El-Bialy “Antibacterial/Antiviral Face Masks: Processing, Characteristics, Challenges, and Sustainability” “MIJST”.
22. Md Rahatuzzaman, Minar Mahmud, Sazedur Rahman, Md Enamul Hoque “Design, fabrication, and characterization of 3D-printed ABS and PLA scaffolds potentially for tissue engineering” Results in Engineering
23. Md Rubel Alam, Md Abdus Shahid, Shah Alimuzzaman, Md Mehedi Hasan, Md Enamul Hoque. “Electrospun bio-nano hybrid scaffold from collagen, Nigella sativa, and chitosan for skin tissue engineering application”
24. Adib Bin Rashid, Abu Saleh Md Nakib Uddin, Fahima Akter Azrin, Khondker Safin Kaosar Saad, Md Enamul Hoque. “3D bioprinting in the era of 4th industrial revolution–insights, advanced applications, and future prospects”
25. Md Enamul Hoque, Sadia Mannan Shanta, Rhythem Tahrin, Saem Chowdhury, Zarin Tasnim, Md Abdul Alim Shuvo, Shifat Al Hasnayeen Riham. “A benign way of measuring hemoglobin in blood–Towards developing a non-invasive technique”
26. Palash Kumar Sarker, Hafizur Rahman, Kulsum Ara, Md. Shahidul Kabir, Shishir Kanti Pramanik, Maruf Hasan. “Prevalence of Multidrug-Resistant Salmonella in Raw Salad Vegetables in Dhaka Metropolitan Area” MIST INTERNATIONAL JOURNAL OF SCIENCE AND TECHNOLOGY, 11(1), 51-57. https://doi.org/10.47981/j.mijst.11(01)2023.396(51-57)
27. Maruf Hasan et el. “Construction of copy number variation landscape and characterization of associated genes in a Bangladeshi cohort of neurodevelopmental disorders” Frontiers in genetics, 14, 955631. https://doi.org/10.3389/fgene.2023.955631
28. Md Ashrafuzzaman, Rayesa Haque Rupanti, Nawrin Tasnim, Tasnuba Tabassum Mourin. “Handbook of Research on Consumer Behavioral Analytics in Metaverse and the Adoption of a Virtual World”
29. Sakib Abrar Hossain, Md Asadur Rahman, Amitabha Chakrabarty, Mohd Abdur Rashid, Anna Kuwana and Haruo Kobayashi. “Emotional State Classification from MUSIC-Based Features of Multichannel EEG Signals”
30. M. M. H. Milu, Md Asadur Rahman, M. A. Rashid, A. Kuwana, and H. Kobayashi. “Improvement of Classification Accuracy of Four-Class Voluntary-Imagery fNIRS Signals using Convolutional Neural Networks”
31. Md Rayahan Sarker Bipul, Md Asadur Rahman, Md Foisal Hossain “Study on different brain activation rearrangement during cognitive workload from ERD/ERS and coherence analysis”
32. J. Ahmed, F. Hakim and M. A. Rahman, “Multi-Stage Medical Image Encryption System Combining RSA and Steganography” -accepted in International Journal of Image, Graphics and Signal Processing (IJIGSP)
33. Faris Mohammed AL-Oqla, Mohammed Hassouna Alaaeddin, Md Enamul Hoque, & Vijay Kumar Thakur “Biopolymers and Biomimetic Materials in Medical and Electronic-Related Applications for Environment–Health–Development Nexus: Systematic Review”. Journal of Bionic Engineering
34. Adib Bin Rashid, Nazmir-Nur Showva, Md Enamul Hoque “Gelatin based scaffolds for tissue engineeringa review” Current Opinion in Biomedical Engineering
35. Md. Rubel Alam, Shah Alimuzzaman, Md. Abdus Shahid, Md Enamul Hoque “Collagen/Chitosan/Nigella Sativa Inscribed Electrospun Hybrid Bio-Nanocomposite for Skin Tissue Engineering” Journal of Biomaterials Science: Polymer Edition
36. Rahman S.M.A, Salah Issa, Mamdouh El Haj Assad, Sheikh Khaleduzzaman Shah, Mohammad Ali Abdelkareem, Md Enamul Hoque, & A.G. Olabi “Performance enhancement and life cycle analysis of a novel solar HVAC system using underground water and energy recovery technique” Thermal Science and Engineering Progress
37. Balaji Ayyanar Chinnapan, Marimuthu Krishnaswamy, Huaizhong Xu, Md Enamul Hoque. “Electrospinning Techniques, Applications”. Polymers Effects of Process Parameters, and Their
38. Sankar Rajan, K. Marimuthu, C. Balaji Ayyanar, Md Enamul Hoque “Development and in-vitro characterization of HAP blended PVA/PEG bio-membrane” Journal of Materials Research and Technology
39. Md Zillur Rahman, Md Enamul Hoque, Md Rubel Alam, Md Abdur Rouf, Saiful Islam Khan, Huaizhong Xu, and Seeram Ramakrishna “Face Masks to Combat Coronavirus (COVID-19)—Processing, Roles, Requirements, Efficacy, Risk and Sustainability” Polymers
40. Balaji Ayyanar Chinnappan, Marimuthu Krishnaswamy, Mugilan Thanigachalam, Huaizhong Xu, Saiful Islam Khan, Md Enamul Hoque “Fabrication, Characterization and In Vitro Assessment of Laevistrombus canarium-Derived Hydroxyapatite Particulate-Filled Polymer Composite for Implant Applications”. Polymers
41. Enock Siankwilimba, Jacqueline Hiddlestone-Mumford, Bernard Hang’ombe Mudenda, Chisoni Mumba, Md Enamul Hoque. “COVID-19 and the Sustainability of Agricultural Extension Models”. International Journal of Applied Chemical and Biological Sciences
42. “Chinnappan, B. A., Krishnaswamy, M., Thanigachalam, M., Xu, H., Saiful Islam Khan, & Hoque, M. E. “Fabrication, Characterization and In Vitro Assessment of Laevistrombus canarium-Derived Hydroxyapatite Particulate-Filled Polymer Composite for Implant Applications”. Polymers
43. Niaz Mahmud, Muzahidul I. Animulk, M. Khalid Hossain*, Md Ishak Khan, Shihab Uddin, Md. Ashrafuzzaman and Md Mushfiqur Rahaman “Advances in Nanomaterial-Based Platforms to Combat COVID-19: Diagnostics, Preventions, Therapeutics, and Vaccine Developments” ACS Applied Bio Materials
44. Sadman Rahman Sadid, Mohammed S Kabir, Samreen T Mahmud, Md Saiful Islam, AHM Waliul Islam, M Tarik Arafat. “Segmenting 3D geometry of left coronary artery from coronary CT angiography using deep learning for hemodynamic evaluation.” IOP Publishing
45. Aishwariya Dutta, Md. Kamrul Hasan, Mohiuddin Ahmad, Md. Abdul Awal, Md. Akhtarul Islam, Mehedi Masud, and Hossam Meshref. “Early Prediction of Diabetes Using an Ensemble of Machine Learning Models.” International Journal of Environmental Research and Public Health, MDPI
46. Md Enamul Hoque, Asif Mahmud Rayhan, Samira Islam Shaily, “Natural Fiber-based Green Composites: Processing, Properties and Biomedical Applications, Applied Science and Engineering Progress, vol. 14, no. 4, pp. 689-718, 2021.
47. Tawsifur Rahman, Amith Khandakar, Md Enamul Hoque, Nabil Ibtehaz, et. al., “Development and Validation of an Early Scoring System for Prediction of Disease Severity in COVID-19 using Complete Blood Count Parameters,” IEEE Access, vol. 9, pp. 120422- 120441, 2021.
48. Manik Chandra Biswas, et. al., Md Enamul Hoque, Muhammad Ali Imam, “Recent Advancement of Biopolymers and Their Potential Biomedical Applications,” Journal of Polymers and the Environment, 2021. doi: doi.org/10.1007/s10924-021-02199-y
49. Tamrin Nuge, Ziqian Liu, Xiaoling Liu, Bee Chin Ang, Andri Andriyana, Hendrik Simon Cornelis Metselaar, Md Enamul Hoque, “Recent advances in scaffolding from natural-based polymers for volumetric muscle injury” Molecules, https://doi.org/10.3390/molecules26030699 vol. 26, no. 3, 699, 2021.
50. J Anita Lett, Suresh Sagadevan, Is Fatimah, Md Enamul Hoque, et. al., “Recent advances in natural polymer-based hydroxyapatite scaffolds: Properties and applications,” European Polymer Journal, 148, 110360, 2021. https://doi.org/10.1016/j.eurpolymj.2021.110360.
39. K Karthik, D Radhika, D Gnanasangeetha, K Gurushankar, ME Hoque, “Two-dimensional based hybrid materials for photocatalytic conversion of carbon dioxide into hydrocarbon fuels: A mini review,” Physics and Chemistry of Solid State, 22 (1), 132-140, 2021. https://doi.org/10.15330/pcss.22.1.132-140.
40. Shek Rahman, Hegazy Rezk, Mohammad Ali Abdelkareem, Md Enamul Hoque, Tariq Mahbub, Sheikh Shah, Ahmed M. Nassef, “Artificial Neural Network Model for predicting drying performance of osmotically treated heat sensitive products during vacuum contact drying” Journal of CMC-Computers, Materials & Continua, 2021 (In Press).
41. SMA Rahman, AM Nassef, H Rezk, MEH Assad, ME Hoque, “Experimental investigations and modeling of vacuum oven process using several semi-empirical models and a fuzzy model of cocoa beans,” Heat Mass Transfer, 57, 175–188 (2021). https://doi.org/10.1007/s00231- 02002943-5
42. Mohsen Golieskardi, Meenaloshini Satgunam, Dinesh Ragurajan, Md Enamul Hoque, “Angela Min Hwei Ng. Microstructural, Tribological, and Degradation Properties of Al2O3- and CeO2Doped 3 mol.% Yttria-Stabilized Zirconia Bioceramic for Biomedical Applications,” Journal of Materials Engineering and Performance, 29, 2890–2897, 2020; https://doi.org/10.1007/s11665020-04829-3
43. Md. Eaqub Ali, Md Enamul Hoque, SK Safdar Hossain, Manik Chandra Biswas, “Nanoadsorbents for Wastewater Treatment – Next Generation Biotechnological Solution,” International Journal of Environmental Science and Technology, 2020; DOI: https://doi.org/10.1007/s13762-020-02755-4
44. T Nuge, KY Tshai, SS Lim, N Nordin, ME Hoque, “Characterization and optimization of the mechanical properties of electrospun gelatin nanofibrous scaffolds,” World Journal of Engineering, vol. 17(1), pp. 12-20, 2020; https://doi.org/10.1108/WJE-04-2019-0119
45. Varun Prasath Padmanabhan, et. al, Md Enamul Hoque, Suresh Sagadevan, “Influence of sonication towards the physicochemical and biological characteristics of selenium substituted hydroxyapatites,” New Journal of Chemistry, 2020. doi: https://doi.org/10.1039/D0NJ03771K
46. Mohsen Golieskardi, Meenaloshini Satgunam, Dinesh Ragurajan, Md Enamul Hoque, Angela Min Hwei Ng & Lohashenpahan Shanmuganantha, “Advanced 3Y-TZP bioceramic doped with Al2O3 and CeO2 potentially for biomedical implant applications,” Materials Technology, vol. 34, no. 8, pp. 480-489, 2019; DOI: 10.1080/10667857.2019.1578912
47. Varun Prasath Padmanabhan, Sankara Narayanan, T.S.N., Suresh Sagadevan, Md Enamul Hoque and Ravichandran Kulandaivelu, “Advanced lithium substituted hydroxyapatite nanoparticles for antimicrobial and hemolytic studies,” New Journal of Chemistry, vol. 43, no. 47, pp. 18484-18494, 2019; https://doi.org/10.1039/C9NJ03735G
48. Md Enamul Hoque, Sumona Azad, Mansura Ahmed, Sk S M Tareq Aziz Shovon, Md. Tareq Aziz, Sharjis Ibne Wadud, “A Low-Cost Multichannel Prosthetic Hand: Design and Development,” International Journal of Mathematics and Computers in Simulation, Vol. 13, pp. 9-13, 2019.
49. M. Enamul Hoque, J. Mahmoud Ghorban Daei, and M. Khalid, “Next Generation Biomimetic Bone Tissue Engineering Matrix From Poly (L- Lactic Acid) Pla/Calcium Carbonate Composites Doped With Silver Nanoparticles,” Current Analytical Chemistry, vol. 14, no. 3, pp. 268 – 277, 2018; DOI: 10.2174/1573411013666171003155024
50. M Enamul Hoque, A. Maryanne Peiris, S. M. Atiqure Rahman, M. Abdul Wahab, “New Generation Antibacterial Nanofibrous Membrane for Potential Water Filtration,” Current Analytical Chemistry, vol. 14, 10.2174/1573411013666171009162832. no. 3, pp. 278 – 284, 2018. DOI:
51. S. Sagadevan, Z. Z. Chowdhury, M. R. Bin Johan, R. F. Rafique, F. A. Aziz, M. Enamul Hoque, R. Suriakarthick, “Investigation on Optical, Dielectric And In Vitro Anti-Inflammatory Responses of Titanium Dioxide (Tio2) Nanoparticles” Digest Journal of Nanomaterials and Biostructures, vol. 13(3), pp. 641 – 652, 2018.
52. Md A Wahab, Nazrul Islam, M Enamul Hoque and David James Young, “Recent Advances in Silver Nanoparticle Containing Biopolymer Nanocomposites for Infectious Disease Control – A Mini Review,” Current Analytical Chemistry, vol. 14(6), pp. 198 - 202, 2018; DOI: 10.2174/1573411013666171009163829.
53. Md Enamul Hoque, Wahab M A, Daei J M G, and Chuan Y L., “Polycaprolactone (PCL) based synthetic biopolymers for modern scaffold-based tissue engineering,” International Journal of Applied Science - Research and Review, vol. 5, pp. 56, 2018; DOI: 10.21767/2394- 9988-C2006
54. Sagadevan S, Chowdhury ZZ, Johan M. RB, Khan A.A, Aziz FA, F. Rafique R, Hoque M.E. A facile hydrothermal approach for catalytic and optical behavior of tin oxide- graphene (SnO2/G) nanocomposite, PLoS ONE, vol. 13, no. 10: e0202694, 2018. doi:10.1371/journal.pone.0202694.
55. Isha Das, Suresh Sagadevan, Zaira Zaman Chowdhury, M Enamul Hoque. Development, optimization and characterization of a two step sol-gel synthesis route for ZnO/SnO2 nanocomposite, Journal of Materials Science: Materials in Electronics, vol. 29, no. 5, pp. 41284135, 2018. doi:10.1007/s10854-017-8357-5
56. Israt Humaira, Kazi Arman Ahmed, Sayantee Roy, Zareen Tasnim Safa, F. M. Tanvir Hasan Raian, Md. Ashrafuzzaman*, “Design and Development of an Advanced Affordable Wearable Safety Device for Women: Freedom Against Fearsome”, Advances in Science, Technology and Engineering Systems Journal, Vol. 6, Issue 2, pp. 829-836, 2021. DOI: 10.25046/aj060296
57. Mohammad Tareq Alam, Md. Ashrafuzzaman*, Nazmir Nur Showva, Mansura Ahmed, Md. Asadur Rahman, “Geographical Modules of COVID-19 Pandemic in Bangladesh: Social Response and Action Taken”, SciMedicine Journal, vol. 6, Special Issue “Covid-19”, pp. 24- 35, 2021. DOI: 10.28991/SciMedJ-2021-03-SI-4
58. Farzana Rashid, Md. Ashrafuzzaman*, SK Laila Ayesha, Sadia Tanzim Islam, Niaz Mahmud and Md. Asadur Rahman, “An Approximate Overview of COVID-19 Treatment Approaches by Registered Physicians of Bangladesh”, Insights of Biomedical Research, Vol. 4, Issue 1, pp. 125138, 2020. DOI: 10.36959/584/459
59. Puja Saha,Saima Chowdhury, Afsana Mehrab, Md. Ashrafuzzaman*, “Faster Way of Brain Tumor Detection from Scratch MRI Images”, International Journal of Scientific & Engineering Research, Vol. 11, Issue 4, pp. 1211-1215, 2020.
60. Md. Ashrafuzzaman*, Farahdiba Zarin, Parsa Sanjana Binte Hoque, Faiza Ahmed, Afsana Mimi, “A Case Study of the Potential Measures Taken Regarding Effective Minimization of Congenital Birth Defects in Bangladesh”, Journal of Slovenská zdravotnícka univerzita v Bratislave, Vol. 16, Issue. 1, pp. 32, 2020, Published by Slovak Medical University, Bratislava
61. Md. Ashrafuzzaman*, Zannatul Naim, Md Mustahsan Billah, S M Masud Rana, “Replication and Transcriptional Regulation Review of Respiratory Syncytial Virus (RSV)”, EC Microbiology, Vol. 7.2, pp. 58-66, 2017.
62. Md. Ashrafuzzaman*, Golam Sarwar Raju, Muhammad Imam Uddin Abeer, Abu Zafor Mohammad Salahuddin, Dipti Debnath, S. M. Masud Rana, “Antidiarrheal Activity of Three Medicinal Plants in Swiss Albino Mice”, International Journal of Biomedicine (IJBM), Vol. 6(3), pp. 233-236, 2016. DOI: 10.21103/Article6(3)_OA16.
63. Rahman MM, Hasan M, Ahmed A. (2021). Potential detrimental role of soluble ACE2 in severe COVID-19 comorbid patients. Journal of Reviews in Medical Virology, vol. 31, no. 5, pp:1-12, 2021. doi: 10.1002/rmv.2213.
64. Anik, M.I., Mahmud, N., Al Masud, A. and Hasan, M., 2021. Gold nanoparticles (GNPs) in biomedical and clinical applications: A review. Nano Select.
65. Md. Asadur Rahman, Anika Anjum, Md. Mahmudul Haque Milu, Farzana Khanam, Mohammad Shorif Uddin, Md. Nurunnabi Mollah, “Emotion recognition from EEG-based relative power spectral topography using convolutional neural network,” Array, vol. 11, 2021. doi: 10.1016/j.array.2021.100072
66. Md. Asadur Rahman, Mohd Abdur Rashid, Mohiuddin Ahmad, Anna Kuwana, and Haruo Kobayashi, “Modeling and classification of voluntary and imagery movements from the prefrontal fNIRS signals,” IEEE Access, vol. 8, pp. 218215-218233, 2020. doi: 10.1109/ACCESS.2020.3042249
67. Md. Asadur Rahman, Abu Bakar Siddik, Farzana Khanam, Tarun Kanti Ghosh, and Mohiuddin Ahmad, “A Narrative Review on Clinical Applications of fNIRS,” Journal of Digital Imaging, vol. 33, no. 5, pp: 1167-1184, 2020. doi: 10.1007/s10278-020-00387-1
68. Md. Asadur Rahman, Farzana Khanam, Mohiuddin Ahmad, and Mohammad Shorif Uddin, “Multiclass EEG signal classification utilizing Rényi min‑entropy‑based feature selection from wavelet packet transformation,” Brain Informatics, vol. 7, no. 7, 2020. doi: 10.1186/s40708- 020-00108-y.
69. Md. Asadur Rahman, Md. Foisal Hossain, Mazhar Hossain, and Rasel Ahmmed, “Employing PCA and t-statistical approach for feature extraction and classification of emotion from multichannel EEG signal,” Egyptian Informatics Journal, vol. 21, no. 1, pp. 23-35, March 2020. doi: 10.1016/j.eij.2019.10.002
70. Pritom Kumar Saha, Md. Asadur Rahman, Mohammad Khurshed Alam, Asma Ferdowsi, Md. Nurunnabi Mollah, “Common Spatial Pattern in Frequency Domain for Feature Extraction and Classification of Multichannel EEG Signals,” SN Computer Science, vol. 2, no. 149, 2021. doi: 10.1007/s42979-021-00586-9
71. Abu Jar Minhuz Uddin Ahmed, Md. Anwar Uddin, and Md. Asadur Rahman, “Discrete and Connected Characters Recognition from Multi-Line License Plates Using Image Processing and Adaptive Neuro Fuzzy Inference System,” Array, 2021. doi: 10.1016/j.array.2021.100063
72. S. M. Saklain Galib, Sheikh Md. Rabiul Islam, and Md. Asadur Rahman, “A multiple linear regression model approach for two‑class fNIR data classification,” Iran Journal of Computer Science, 2020. doi: 10.1007/s42044-020-00064-0
73. Ferdous Karim Lucy, Khadiza Tun Suha, Sumaiya Tabassum Dipty, Md Sharjis Ibne Wadud, Muhammad Abdul Kadir, “Video based non-contact monitoring of respiratory rate and chest indrawing in children with pneumonia,” Physiological Measurement, Oct 2021, doi: 10.1088/1361-6579/ac34eb.
CONFERENCE PAPER:
1. Nymphia Nourin, Paromita Kundu, Sk Saima, Asst Prof Dr. Md Asadur Rahman. “GLCM and HOG Feature-Based Skin Disease Detection Using Artificial Neural Network”
2. Syeda Umme Ayman, Al Arrafuzzaman, Asst Prof Dr. Md Asadur Rahman. “Subject Dependent Cognitive Load Level Classification from fNIRS Signal Using Support Vector Machine”
3. Akid Ornob et el. “Towards smartphone based complete blood cell estimation from blood smear images”
4. Tasnuba Tabassum Mourin, Rayesa Haque Rupanti, Nawrin Tasnim, Saif Ahmed Quarishi, Akid Ornob, Md Ashrafuzzaman “Effect of Changes in Skin Conductance, Heart Activity at Constant Temperature for Detecting Binary Pain by Analyzing Nociceptive Stimulation”
5. S. M. Nur, S. S. Ridoy, J. Ahmed, F. Hakim, and M. A. Rahman, “Proposal for the Optimal Scheme of Savitzky–Golay Filter for the fNIRS Signals of Different Sampling Rate,” 2023 6th International Conference on Electrical Information and Communication Technology (EICT), Khulna, Bangladesh, 2023, pp. 1-5, doi: 10.1109/EICT61409.2023.10427607
6. Faria Tasnim, Md Tobibul Islam, Aniqa Tahsin Maisha, Israt Sultana, Tasnia Akter, Md Toufiqul Islam “Comparison of Brain Tumor Detection Techniques by Using Different Machine Learning YOLO Algorithms” Lecture Notes in Networks and Systems” by Springer, Singapore.
7. Md Enamul Hoque, Md Abdul Alim Shuvo, Shifat Al Hasnayeen Riham “Design and Development of a Cost-Effective Prosthetic Leg” 4th IEEE Eurasia Conference on Biomedical Engineering, Healthcare and Sustainability 2022 (IEEE ECBIOS 2022), 27-29 May, 2022,
8. Tainan, Taiwan Md Enamul Hoque, Mirazul Alam Sarker “Electrospun r-PET/CNT nanofibrous Mat–Towards Development of Antibacterial Face Mask” 6th Virtual Edition of Polymers, Plastics and Composites (Virtual Polymers-2022), London, UK
9. Md Enamul Hoque, Mirazul Alam Sarker, Md. Rubel Alam, Md. Kabir Hossain, Md. Abdul Gafur “Fabrication and characterization of CNT-integrated nanofibrous membrane for developing an antibacterial face mask” 6th Virtual Edition of Polymers, Plastics and Composites (Virtual Polymers2022) Dhaka, Bangladesh
10. C Balaji Ayyanar, K Marimuthu, B Gayathri, C Bharathiraj, Md Enamul Hoque, “Characterization and In-vitro Investigation of Natural Plant Extracts Blended PVA Biomembrane for Wound-Dressing.” International Online Conference on Nano Materials (ICN 2022), 12-14 August 2022, Kerala, India
11. Md Enamul Hoque,, Asif Mahmud Rayhan “Jute Fiber Reinforced Biocomposite: Towards Developing Composite Bone Plate” 2nd International Conference on Mechanical Engineering and Applied Sciences, 2022 (ICMEAS 2022), Dhaka, Bangladesh
12. Md Enamul Hoque, (Invited Speaker), Mirajul Islam Sarker “Electrospun r-PET/CNT nanofibrous Mat–Towards Development of Antibacterial Face Mask” 6th Virtual Edition of Polymers, Plastics and Composites (Virtual Polymers-2022), London, UK
13. Md Enamul Hoque,, Mirajul Alam Sarker, Md. Rubel Alam, Md. Kabir Hossain, Md. Abdul Gafur “Fabrication and characterization of CNT-integrated nanofibrous membrane for developing an antibacterial face mask” 6th Virtual Edition of Polymers, Plastics and Composites (Virtual Polymers2022) Dhaka, Bangladesh
14. Md Enamul Hoque, (Invited Speaker), Md Rubel Alam. “Face Mask Against COVID-19 – Roles, Requirements, Efficacy and Sustainability” Pathogens Research eConference (Pathogens-eCon2022), Tokyo, Japan
15. Syeda Omia Ahalam Md. Sharjis Ibne Wadud Farhan Ishtiaque, Sadman Rahman Sadid, Mohammed Shihab Kabir. “IoT-Based Low-cost Remote Patient Monitoring and Management system with Deep Learning-Based Arrhythmia and Pneumonia detection.” 2021, IEEE 4th International Conference on Computing, Power and Communication Technologies
16. Md. Anwarul Islam, Md. Shafiul Islam, and Md. Ashrafuzzaman, “Designing of a Decision Support System for Cancer Treatment Using Artificial Intelligence,” 21st Asia-Oceania Congress of Medical Physics, 10-12 December 2021.
17. Sk. Saima, Sadi Mahmood, Mala Khan, Md. Ashrafuzzaman, and Md. Asadur Rahman, “Computer Aided Skin Disease Detection from Image,” 21st Asia-Oceania Congress of Medical Physics, 10-12 December 2021.
18. Farial Tasnim, Mohiuddin Ahmed Sajeeb and Md Enamul Hoque. Design and development of a low-cost trans-femoral prosthesis for the amputees of Bangladesh. International Conference on Science and Technology for Celebrating the Birth Centerary of Bangabandhu (ICSTB-2021), 11-13 March 2021, Dhaka, Bangladesh.
19. F. Ishtiaque, S. R. Sadid, M. S. Kabir, S. O. Ahalam and M. S. I. Wadud, “IoT-Based Low- cost Remote Patient Monitoring and Management system with Deep Learning-Based Arrhythmia and Pneumonia detection,” 2021 IEEE 4th International Conference on Computing, Power and Communication Technologies (GUCON), 2021, pp. 1-6, doi: 10.1109/GUCON50781.2021.9573620.
20. Md Ashrafuzzaman*, Md. Sakib Abrar Hossain, Monjurul Ahsan, Nabil Islam, “Proposed Module for Establishment of National Cardiovascular Database in Low Middle Income Countries, 11th Asian-Pacific Conference on Medical and Biological Engineering. APCMBE 2020. IFMBE Proceedings, Vol 82, pp. 159-172, 2021, Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-66169-4_21
21. Md. Ashrafuzzaman*, Faiza Ahmed, Afsana Mimi, Farahdiba Zarin, Sabrina Shetu, “Ceramide: An Extravagant Prospective for Treatment of Burn Patients”, 11th Asian-Pacific Conference on Medical and Biological Engineering. APCMBE 2020. IFMBE Proceedings, vol 82, pp. 257-271, 2021, Springer Nature Switzerland AG, https://doi.org/10.1007/978-3- 03066169-4_32
22. Kaniz Fatima Audity, Md. Foisal Hossain, and Md. Asadur Rahman, “Computer Aided Atrial Fibrillation Detection from the Statistical Attributes of ECG Signal,” International Conference on Electronics, Communications and Information Technology 2021 (ICECIT 2021), 21 August 2021, Khulna, Bangladesh.
23. Talukdar Raian Ferdous, Md. Asadur Rahman, Rifath Hasan, and Muhammad Muinul Islam, “A Simple Design of a Matlab-Based Function for Topographical Presentation of FNIR Data,” 6th International Conference on Electrical, Control and Computer Engineering InECCE2021, Malaysia.
24. M. Sakib Abrar Hossain, Md. Asadur Rahman and A. Chakrabarty, “MUSIC Model based Neural Information Processing for Emotion Recognition from Multichannel EEG Signal,” 2021 8th International Conference on Signal Processing and Integrated Networks (SPIN), 2021, pp. 955-960, doi: 10.1109/SPIN52536.2021.9565974.
25. Md. Sakib Abrar Hossain and Md Ashrafuzzaman*, “Open Source Robust Machine Learning Software for Medical Patient Data Analysis and Cloud Storage”, 8th European Medical and Biological Engineering Conference. EMBEC 2020. IFMBE Proceedings, Vol 80, pp. 932-943, 2021, Springer Nature Switzerland AG. doi:10.1007/978-3-030-64610-3_104
26. Puja Saha, Afsara Tasnim, Oranti Ahmed Omi, Tarin Rahman, Md. Ashrafuzzaman*, “Photosweep: an Engineering Approach to Develop Cost Effective Sterilization System for Hospitals”, Advances in Decision Sciences, Image Processing, Security and Computer Vision. Learning and Analytics in Intelligent Systems, vol. 3, pp. 31-38, 2019. Springer, Cham. doi: 10.1007/978-3-030-24322-7_5
27. Puja Saha, Masuda Afrin Tuba, Kazi Arman Ahmed, Md. Ashrafuzzaman*, “Development of an Inexpensive Proficient Smart Walking Stick for Visually Impaired People”, Advances in Decision Sciences, Image Processing, Security and Computer Vision. Learning and Analytics in Intelligent Systems, vol. 3, pp. 48-56, 2019. Springer, Cham. doi: 10.1007/978-3-030- 243227_7
28. Ashrafuzzaman M., Zarin F., Foysal Rabbi M., Sanjana Binte Hoque P., Sultana Laboni F., Monjurul Ahsan S., “Bangladesh Government action plan for certified clinical engineers to achieve healthcare SDG by 2030”, 3rd ICEHTMC Proceedings, J Global Clinical Engineering, Special Issue 2, pp. 144, 2019.
29. Md. Ashrafuzzaman*, Faiza Ahmed, Farahdiba Zarin, Sabrina Shetu, Afsana Mimi, “Ceramide: An Inordinate Potential for Burn and Wound Healing”, Proceedings of 5th International Turkic World Conference on Chemical Sciences and Technologies (ITWCCST 2019), pp. 67, 2019.
30. Farahdiba Zarin, Kazi Zerin Tasnim, Fahria Sharmin, Parsa Sanjana Binte Hoque, M. Mahfuza Khatun, Md. Ashrafuzzaman*, “Improved yield and variations in α-Amylase production by media modification and induced mutagenesis of Bacillus licheniformis”, Proceedings of 5th International Turkic World Conference on Chemical Sciences and Technologies (ITWCCST 2019), pp. 68, 2019.
31. Md. Ashrafuzaman*, Mohammad Tareq Alam, Md. Abdullah-Al- Harun, “An Engineering Module to Identify Potential Diabetes Patients and Preventive Measures for Diabetes in Developing Countries like Bangladesh”, World Congress on Medical Physics and Biomedical Engineering 2018. IFMBE Proceedings, Vol 68/1, pp. 405-409, 2018. Springer, Singapore. https://doi.org/10.1007/978-981-10-9035-6_75
32. Md. Ashrafuzzaman*, Md. Sakib Abrar Hossain, Md. Tareq Aziz, “Development of Low Cost Central Monitoring Platform by Modeling and Simulation for Patients Care in Low Middle Income Countries”, World Congress on Medical Physics and Biomedical Engineering 2018. IFMBE Proceedings, Vol 68/1, pp. 737-744, 2018. Springer, Singapore. https://doi.org/10.1007/978-981-10-9035-6_136
33. Md. Ashrafuzzaman, Monjurul Ahsan, Sakib Abrar Hossain, Nabil Islam, “Proposed module for establishment of national cardiovascular database in low middle-income countries”, Fourth WHO Global Forum on Medical Devices REPORT, pp. 93, AMTZ-Kalam Convention Centre, Visakhapatnam, India, 13-15 December 2018, WHO
34. Md. Ashrafuzzaman, Afsana Mimi, Faiza Ahmed, Sabrina Shetu , “Development of ceramide loaded chitosan composite (ChiCeC) for biomedical applications universally”, Fourth WHO Global Forum on Medical Devices REPORT, pp. 117, AMTZ-Kalam Convention Centre, Visakhapatnam, India 13-15 December 2018, WHO
35. Md. Ashrafuzzaman, “Current status of medical device industries in South-East Asia, Specially in Bangladesh and future scopes to achieve SDG 2030”, 1st Global High-End Manufacturing Summit-2019 (GHMS-2019), Changsha, China, 13-16 May 2019.
36. Md. Ashrafuzzaman, “Biomedical and clinical engineering development in Bangladesh”, Third WHO Global Forum on Medical Devices REPORT, pp. 106-107, Centre International de Conférences Genève (CICG) Geneva, Switzerland, 10 – 12 May 2017. WHO
37. M. A. Hossain, M. Saiful Islam, M. Ahmad, M. Ashrafuzzaman, Yadin David, “Necessity of clinical engineering to regulate the medical devices in middle income countries”, Proceedings of 2nd International Clinical Engineering and Health Technology Management Congress - II ICEHTMC, Sao Paulo, Brazil, 20-22 September, 2017.
38. M. A. Hossain, M. Ahmad, Azman Hamid, M. R. Islam, A. K. M. Rahman, M. Ashrafuzzaman, Yadin David, “Clinical Engineering Approach to Improve Healthcare Technology Management for Enhancing Healthcare Delivery System in Middle Income Countries”, Proceedings of 2nd International Clinical Engineering and Health Technology Management Congress - II ICEHTMC, Sao Paulo, Brazil, 20-22 September, 2017.
39. MF Elahi, MA Islam, " An Efficient Switched-Capacitor Based Single DC Source Inverter with Selective Harmonic Elimination", International Conference on Electrical Engineering and Information & Communication Technology (ICEEICT), Dhaka, Bangladesh, 18-20 November, 2021.
40. MF Elahi, MA Islam, " A New Double Boost Single Source Switched-Capacitor Based Multilevel Inverter", International Conference on Electrical, Information and Communication Technology (EICT), Khulna, Bangladesh, 17-19 December, 2021.
41. MF Elahi, MA Islam, "An Effective Switched-Capacitor Based Thirteen Level Inverter with Low Total Harmonic Distortion," 2020 IEEE Region 10 Symposium (TENSYMP), 714-717.
42. MF Elahi, MA Islam, "A New Nine Level Inverter with Low TSV and Fewer Numbers of Components for Renewable Energy Systems", International Conference on Electrical, Computer and Communication Engineering (ECCE), Cox's Bazar, Bangladesh, 7-9 February, 2019.
43. MA Wahed, H Nyeem, MF Elahi, "An Improved Interpolation based Reversible Data Hiding for Medical Images", International Conference on Electrical, Computer and Communication Engineering (ECCE), Cox's Bazar, Bangladesh, 7-9 February, 2019.
44. H Nyeem, MF Elahi, MA Wahed, "A New Pixel to Block Mapping for Efficient and High Fidelity Data Hiding", International Conference on Robotics, Electrical and Signal Processing Techniques (ICREST), Dhaka, Bangladesh, 2019.
45. MA Wahed, H Nyeem, and MF Elahi, "Developing Reversible Data Hiding with Interpolation and Local Dispersion," International Conference on Robotics, Electrical and Signal Processing Techniques (ICREST), Dhaka, Bangladesh, 2019.
46. H Nyeem, MF Elahi and MA Wahed, "A New Reversible Data Hiding Scheme with Pixel-to- Block Mapping," 10th International Conference on Electrical and Computer Engineering (ICECE), Dhaka, Bangladesh, 2018.
47. MF Elahi, H Nyeem and MA Wahed, "Efficient and Lossless Hiding of Electronic Patient Records in Medical Images," 21st International Conference of Computer and Information Technology (ICCIT), Dhaka, Bangladesh, 2018.
BOOKS (EDITED):
1. M. Enamul Hoque, Ahmed Sharif, Mohammad Jawaid (Eds). Green Biocomposites For Biomedical Engineering: Design, Properties, And Applications. Elsevier, UK, 2021. https://www.elsevier.com/books/green-biocomposites-for-biomedical-engineering/hoque/978-0- 12-821553-1
2. Anish Khan, Francis Verpoort, Abdullah Asiri, Md Enamul Hoque, Anwar Bilgrami, Mohammad Azam, Kadiyala Chandra Babu Naidu (Eds). Metal-Organic Frameworks For Chemical Reactions: From Organic Transformations to Energy Applications. Elsevier, USA, 2021. https://www.elsevier.com/books/metal-organic-frameworks-for-chemical- reactions/khan/978-0-12-822099-3
3. Catalin Pruncu, Selim Gürgen, M. Enamul Hoque (Eds). Fiber-Reinforced Polymers: Processes and Applications. Nova Science Publishers, USA, 2021. https://novapublishers.com/shop/fiberreinforced-polymers-processes-and-applications/
4. KM Ramkumar, R Senthilkumar, Md Enamul Hoque. “Advanced Mammalian Cell Culture Techniques: Principles and Practices”
5. Bhasha Sharma, M Enamul Hoque. “Polysaccharides: Advanced Polymeric Materials”
6. M Enamul Hoque, Kheng Lim Goh, Suresh Sagadevan.” Advanced Bioceramics: Properties, Processing, and Applications”
7. Md Enamul Hoque et el. “Advanced Polymer Nanocomposites: Science, Technology and Applications”
8. Senthil Muthu Kumar Thiagamani, Md Enamul Hoque, Senthilkumar Krishnasamy, Chandrasekar Muthukumar, Suchart Siengchin (Eds) “Vibration and Damping Behavior of Biocomposites” Publisher CRC Press. 9. ”
BOOK CHAPTERS AND OTHERS
1. Md Enamul Hoque et el. “Carbon Nanomaterial-Incorporated Supramolecular Drug Delivery” book “Carbon Based Nanomaterials for Drug Delivery” by “Springer Nature Singapore”
2. Md Enamul Hoque et el. “Graphene Quantum Dots-based Nanomaterials for Drug Delivery” Carbon Based Nanomaterials for Drug Delivery” by “Springer Nature Singapore
3. Md Enamul Hoque et el. “Innovations in 3D Printing‐Assisted Biopolymer Composites for Aerospace Applications” Sustainable 3D Printing for Innovative Biopolymer Production and Applications by John Wiley & Sons, Inc.
4. Md Enamul Hoque et el. “Olive Oil Based Composites” “Vegetable Oil-Based Composites: Processing, Properties and Applications” by “Springer Nature Singapore”.
5. Md Enamul Hoque et el. “Preparation of Media for Cell Culture”
6. Md Enamul Hoque et el. “Passaging of Cell Lines”
7. Md Enamul Hoque et el. “Single-Cell Analysis”
8. Md Enamul Hoque et el. “Cryopreservation of Cells”
9. Md Enamul Hoque et el. “Laboratory Safety”
10. Md Enamul Hoque et el. “Primary Cell Culture”
11. Md Enamul Hoque et el. “Cellular Cytotoxicity”
12. Md Enamul Hoque et el. “Polysaccharides for Agricultural Applications: A Growing Presence on the Farms”
13. Md Enamul Hoque et el. “Synthetic Polysaccharides: Adored, Deplored”
14. Md Enamul Hoque et el. “Carbohydrate-Based Therapeutics: Evolution from Wellness Pursuit to Medical Treatment”
15. Md Enamul Hoque et el. “Bioceramics for Drug Delivery”
16. Md Enamul Hoque et el. “Structural, Chemical, Electrical, Thermal, and Mechanical Properties of Bioceramics”
17. Md Enamul Hoque et el. “Processing of Bioceramics by Extrusion and Slip Casting”
18. Md Enamul Hoque et el. “Overview of Bioceramics”
19. Habibul Islam, Md Enamul Hoque, Carlo Santulli.” Polymer Nanocomposites for Biomedical Applications”
20. Mamun Rabbani, Sharjis Ibne Wadud, Md Enamul Hoque “Polymer Nanocomposites for Microelectronic Devices and Biosensors”
21. Kazi Faiza Amin, Asrafuzzaman, Ayeman Mazdi Nahin, Md Enamul Hoque “Polymer Nanocomposites for Adhesives and Coatings”
22. Muhammad Ifaz Shahriar Chowdhury, Yashdi Saif Autul, Sazedur Rahman, Md Enamul Hoque “Polymer Nanocomposites for Automotive”
23. Asrafuzzaman, Kazi Faiza Amin, Aungkan Sen, Md Enamul Hoque “Polymer Nanocomposites for Energy”
24. Adib Bin Rashid, Md Enamul Hoque “Polymer Nanocomposites for Defense Applications”
25. Habibul Islam, Md Enamul Hoque “Polymer Nanocomposites for Packaging”.
26. Md. Rubel Alam, Tarikul Islam, Md. Reazuddin Md Enamul Hoque “Carbon-based polymer nanocomposites for electronic textiles (e-textiles)” Repon and
27. Md Sarif Sakaeyt Hosen, Md Jaynal Abedin, Md Enamul Hoque “Factors Affecting the Vibration and Damping Characteristics of Polymer Composites”
28. Muhammad Ifaz Shahriar Chowdhury, Yashdi Saif Autul, Md Enamul Hoque, “Free Vibration and Damping Properties of the Pineapple Leaf Fiber- and Sisal Fiber-Based Polymer Composites”
29. Md Mahmudul Haque Milu, Anika Anjum, Md Asadur Rahman, Md Enamul Hoque, “Influence of Compatibilizer on Free Vibration and Damping Behavior of Polymer Biocomposites”
30. Nabila Ali, Md Enamul Hoque “Bionanocomposites in the Automotive and Aerospace Applications”
31. Hosen M.S.S., Abedin M.J., Hoque M.E., Rahman M.Z. “Influence of Moisture Absorption on Physico-Chemical Properties of Natural Fiber-Based Hybrid Composites”
32. Habibul Islam, Md Enamul Hoque, and Muhammad H. Hasan “Biodegradability of polyolefins: Processes and procedures” Elsevier
33. Md Zillur Rahman, M Mahfuza Khatun and Md Enamul Hoque “Plastic waste to plastic value:Role of industrial biotechnology” Elsevier
34. Yashdi Saif Autul, Rowfi Khan, Muhammad Ifaz Shahria Chowdhury, Md Enamul Hoque, and Suresh Sagadevan “Synthesis of Two-dimensional Hybrid Materials, Unique Properties, and Challenges” Royal Society of Chemistry
35. Muhammad Ifaz Shahriar Chowdhury, Md Enamul Hoque,, Shek Md Atiqure Rahman “CO2 Conversion to Chemicals and Fuel Cells Using Renewable Energy Sources” Publisher “Royal Society of Chemistry”
36. Md. Ashrafuzzaman*, Md. Mahmudul Haque Milu, Anika Anjum, Farzana Khanam, and Md. Asadur Rahman “Big Data Analytics Techniques for Healthcare; Big Data analytics for Healthcare Datasets, techniques, Life Cycles, management and Applications." Chapter 10, pp. 149-162, 2022. Academic Press, Elsevier
37. Omanin Siddiqua Prova, Faiza Ahmed, Jafrin Sultana and Md. Ashrafuzzaman* “Big medical data analytics for diagnosis; Big Data analytics for Healthcare Datasets, techniques, Life Cycles, management and Applications, Chapter 10, pp. 111-124, 2022” Academic Press, Elsevier
38. Md. Ashrafuzzaman*, A.S.M Adib Hasan Rihat, Md. Sharif Hossain, Mohammad tareq Alam “The Impact of Social Media and Digital Marketing on Consumer Behavior, Handbook of Research on Consumer Behavior Change and Data Analytics in the Socio-Digital Era, pp. 275-294, 2022” Academic Press, Elsevier
39. Md Enamul Hoque & Md Ushama Shafoyat. “Self-healing polymer nanocomposite films and coatings” Polymer Nanocomposite Films and Coatings” by” Woodhead Publishing”
40. Md Enamul Hoque, Md. Ushama Shafoyat & Fatiha Tabassun “Polymers, Their Composites, Blends, and Nanocomposites for the Fabrication of Prosthetics”. Applications of Biopolymers in Science, Biotechnology, and Engineering” by “John Wiley & Sons, Inc.
41. Md Enamul Hoque & Md Ushama Shafoyat, “Biopolymers and Their Composites for Biotechnological Applications” Applications of Biopolymers in Science, Biotechnology, and Engineering” by “John Wiley & Sons, Inc
42. Ramzi Khiari, Ragab Abouzeid, Ahmed El-Gendy & Md Enamul Hoque, “Nanocomposite films: Features and suitability for food packaging” “Biocomposite for industrial Applications” by “Elsevier
43. Sakib Hossain Khan, Md Zillur Rahman, Mohammad Rejaul Haque & Md Enamul Hoque “Characterization and Comparative Evaluation of Structural, Chemical, Thermal, Mechanical, and Morphological Properties of Plant Fibers” Springer Nature Singapore
44. Sazedur Rahman, Muhammad Ifaz Shahriar Chowdhury & Md Enamul Hoque “Annual Plant Reinforced Biocomposite Fiberboards—Investigation on Mechanical Properties” Springer Nature Singapore
45. Mohammad Fahim Tazwar, Syed Talha Muhtasim, Tousif Reza, Yashdi Saif Autul, Mohammed Enamul Hoque “Inorganic Nanofiller-Incorporated Polymeric Nanocomposites for Biomedical Applications” CRC Press
46. Habibul Islam, Md Enamul Hoque, Shek Md Atiqure Rahman, Faris M. Al-Oqla “Environmental Impact in Terms of Nanotoxicity and Limitations of Employing Organic Nanofillers in Polymers” CRC Press.
47. Tousif Reza, Rokib Uddin, Mohammad Fahim Tazwar, Md Enamul Hoque, Yashdi Saif Autul “Mechanical, Thermal, Electrical, Optical, and Magnetic Properties of Organic Nanofillers” CRC Press.
48. Md. Ashrafuzzaman, Rabita Rahman Era, Saira Binte Awal, Israt Sultana, Arjun Thimmaiah, Amit Kumar Sharma, Jitendra Sharma “Transforming Medical Tourism Through an Integrated Business Intelligence Platform: Data-Driven Insights and Healthcare Industry Impact”. Data-Driven Business Intelligence Systems for Socio-Technical Organizations” by “IGI Global”, a renowned international publisher
49. Pranta Ray, Prof Dr. Md Enamul Hoque, M Azam Ali. “Sodium alginate nanoadsorbents for wastewater treatment: synthesis and characterizations”
50. Syed Zubair Ali, Md Khalid Nahian, Prof Dr. Md Enamul Hoque. “Extraction of cellulose from agro-industrial wastes”
51. Foysal Anwar, Asrafuzzaman, Kazi Faiza Amin, Prof Dr. Md Enamul Hoque. “Tools and techniques for characterizing sustainable hydrogels”
52. Zayed Bin Zakir Shawon, Moshiur Rahman Khan, Nusra Akter Takia, Tausif Hasan Khan, Ayesha Rahman, Md Enamul Hoque. “Structure-property-function relationships of sustainable hydrogels”
53. Saadman Kabir, Ananta Banik, Moshfiq-Us-Saleheen Chowdhury, Jannatul Ferdaus & Md Ashrafuzzaman. “Development of Wearable and Portable Cardiac Arrest Prediction System”
54. Omanin Siddiqua Prova, Jafrin Sultana, Faiza Ahmed, and Md. Ashrafuzzaman, “Big Medical Data Analytics for Diagnosis,” Book Chapter Accepted for Publication in Elsevier, 2021.
55. Md. Ashrafuzzaman, Md. mahmudul Haque Milu, Anika Anjum, Farzana Khanam, and Md. Asadur Rahman, “Big Data Analytics Techniques for Healthcare,” Book Chapter Accepted for Publication in Elsevier, 2021.
56. Md. Mahmudul Haque Milu, Anika Anjum, Md. Asadur Rahman, and Md. Enamul Haque, “Influence of compatibilizer on free vibration and damping characteristics of polymer based biocomposites,” Book Chapter Accepted for Publication in Elsevier, 2021.
57. M. Enamul Hoque, Ahmed Sharif, Mohammad Jawaid (Eds). Green Biocomposites For Biomedical Engineering: Design, Properties, And Applications. Elsevier, UK, 2021. https://www.elsevier.com/books/green-biocomposites-for-biomedical-engineering/hoque/9780-12-821553-1
58. Anish Khan, Francis Verpoort, Abdullah Asiri, Md Enamul Hoque, Anwar Bilgrami, Mohammad Azam, Kadiyala Chandra Babu Naidu (Eds). Metal-Organic Frameworks For Chemical Reactions: From Organic Transformations to Energy Applications. Elsevier, USA, 2021. https://www.elsevier.com/books/metal-organic-frameworks-for-chemical- reactions/khan/978-0-12-822099-3
59. Catalin Pruncu, Selim Gürgen, M. Enamul Hoque (Eds). Fiber-Reinforced Polymers: Processes and Applications. Nova Science Publishers, USA, 2021. https://novapublishers.com/shop/fiberreinforced-polymers-processes-and-applications/
60. Jarin Tusnim, Md Enamul Hoque, “Bioresorbable biocomposites,” Green Biocomposites for Biomedical Engineering, Woodhead Publishing, 2021.
61. Reaz Ahmed Chowdhury, Arif Mohaimin Sadri, Md Enamul Hoque, “Industrial implementations of biocomposites,” Green Biocomposites for Biomedical Engineering, Woodhead Publishing, 2021.
62. Abolfazl Golieskardi, Md Enamul Hoque, Mohsen Golieskardi, “Introduction to green biocomposites,” Green Biocomposites for Biomedical Engineering, Woodhead Publishing, 2021.
63. R Kumar, P Suresh Kumar, R Manju, Md Enamul Hoque, “Ethical issues of biocomposites,” Green Biocomposites for Biomedical Engineering, Woodhead Publishing, 2021.
64. Manik Chandra Biswas, Pranab K Nandy, Md Enamul Hoque, “Safety and health issues of biocomposites,” Green Biocomposites for Biomedical Engineering, Woodhead Publishing, 2021.
65. Manik Chandra Biswas, Mostakima Mafruha Lubna, Zaheeruddin Mohammed, Md Hasan Ul Iqbal, Md Enamul Hoque, “Graphene and Carbon Nanotube-Based Hybrid Nanocomposites: Preparation to Applications,” Graphene and Nanoparticles Hybrid Nanocomposites: From Preparation to Applications, Springer Nature, 2021.
66. Md Enamul Hoque, Yong Leng Chuan, Pang Ming Meng, “Agro-based green biocomposites for packaging applications,” Biopolymers and Biocomposites from Agro-Waste for Packaging Applications, Woodhead Publishing, 2021.
67. Suresh Sagadevan, Mohd Rafie Johan, Md Enamul Hoque, J Anita Lett, Kamrun Nahar Fatema, Nanthini Sridewi, “Advanced Hybrid Conducting Polymers: Tissue Engineering Aspects,” Advances in Hybrid Conducting Polymer Technology, Springer, 2021.
68. Shiplu Roy Chowdhury, Yogeswaran Lokanathan, Law Jia Xian, Fauzi Mh Busra, Muhammad Dain Yazid, Nadiah Sulaiman, Gargy Lahiry, Md Enamul Hoque, “3D Printed Bioscaffolds for Developing Tissue-Engineered Constructs,” Design and Manufacturing, IntechOpen, 2020.
69. Asrafuzzaman, Kazi Faiza Amin, Ahmed Sharif, Md Enamul Hoque, “Bonding Mechanism and Interface Enhancement of Bamboo Fiber Reinforced Composites,” Bamboo Fiber Composites, Springer, 2020.
70. Sushmita Majumder, Ahmed Sharif, Md Enamul Hoque, “Electrospun cellulose acetate nanofiber: Characterization and applications,” Advanced Processing, Properties, and Applications of Starch and Other Bio-Based Polymers, Elsevier, 2020.
71. Tilottoma Saha, Md Enamul Hoque, Tariq Mahbub, “Biopolymers for Sustainable Packaging in Food, Cosmetics, and Pharmaceuticals,” Advanced Processing, Properties, and Applications of Starch and Other Bio-Based Polymers, Elsevier, 2020.
72. Jarin Tusnim, Md Enamul Hoque, Manik Chandra Biswas, “Biopolymers in Building Materials,” Advanced Processing, Properties, and Applications of Starch and Other Bio-Based Polymers, Elsevier, 2020.
73. Tariq Mahbub, Md Enamul Hoque, “Introduction to nanomaterials and nanomanufacturing for nanosensors,” Nanofabrication for Smart Nanosensor Applications, Elsevier, 2020.
74. Mamun Rabbani, Md Enamul Hoque, Zaid Bin Mahbub, “Nanosensors in biomedical and environmental applications: Perspectives and prospects,” Nanofabrication for Smart Nanosensor Applications, Elsevier, 2020.
75. Zayed Bin Zakir Shawon, Md Enamul Hoque, Shiplu Roy Chowdhury, “Nanosensors and nanobiosensors: Agricultural and food technology aspects,” Nanofabrication for Smart Nanosensor Applications, Elsevier, 2020.
76. M Mahfuza Khatun, M Enamul Hoque, Sharjis Ibne Wadud, Zayed Bin Zakir Shawon, “Recent developments in nanocellulose and nanohydrogel matrices—towards stem cell research and development,” Sustainable Nanocellulose And Nanohydrogels From Natural Sources, Elsevier, 2020.
77. Jarin Tusnim, Md Enamul Hoque, Sakib Abrar Hossain, Ahmed Abdel-Wahab, Ahmed Abdala, Md A Wahab, “Nanocellulose and nanohydrogels for the development of cleaner energy and future sustainable materials,” Sustainable Nanocellulose And Nanohydrogels From Natural Sources, Elsevier, 2020.
78. Ahmed Sharif, Sudipta Mondal, Md Enamul Hoque, “Polylactic acid (PLA)-based nanocomposites: Processing and properties,” Bio-based Polymers and Nanocomposites, Springer, 2019.
79. Ahmed Sharif, Md Enamul Hoque, “Renewable resource-based polymers,” Bio-based Polymers and Nanocomposites, Springer, 2019.
80. Suresh Sagadevan, Aysha Fareen, Md Enamul Hoque, Zaira Zaman Chowdhury, Mohd Rafie Bin Johan, Rahman F Rafique, Fauziah Abdul Aziz, J Anita Lett, “Nanostructured polymer biocomposites: pharmaceutical applications,” Nanostructured Polymer Composites for Biomedical Applications, Elsevier, 2019.
81. Md Enamul Hoque, Tamrin Nuge, Tshai Kim Yeow, Norshariza Nordin, J Anita Lett, “Electrospun matrices from natural polymers for skin regeneration,” Nanostructured Polymer Composites for Biomedical Applications, Elsevier, 2019.