1. Zaman, A., Majib, M. S., Tanjim, S. A., Siddique, S. M. Ahasan., Islam, S., Aadeeb, M. S., ... & Islam, M. N. (2022). UVC-PURGE: A Novel Cost-effective Disinfection Robot for combating COVID-19 Pandemic. IEEE Access, DOI: 10.1109/ACCESS.2022.3163243
2. Zaman, A., Majib, M. S., Tanjim, S. A., Siddique, S. M. Ahasan, Ashraf, F., Islam, S., ... & Rahman, M. M. (2022). Phoenix: Towards Designing and Developing a Human Assistant Rover. IEEE Access, DOI: 10.1109/ACCESS.2022.3170908
Heat Transfer, Thermodynamics, and Fluid Mechanics
1. Rabby, Md Insiat Islam, Muhammad Ali Rob Sharif, and Farzad Hossain. "Numerical study of laminar convective heat transfer from a corrugated pipe into an Al2O3–AlN/H2O hybrid nanofluid." Case Studies in Thermal Engineering 39 (2022): 102454.
2. Rabby, Md Insiat Islam, N. M. S. Hassan, M. G. Rasul, P. V. Gudimetla, M. N. Nabi, and A. A. Chowdhury. "Effect of non-uniform wall corrugations on laminar convective heat transfer through the rectangular corrugated tube by using graphene nanoplatelets/MWCN hybrid nanofluid." International Journal of Thermal Sciences 187 (2023): 108166.
3. Rabby, Md Insiat Islam, Md Wasi Uddin, Mahafuzur Rahman Sheikh, Humayun Kabir Bhuiyan, Tazeen Afrin Mumu, Fabliha Islam, and Afsana Sultana. "Thermal performance of gasifier cooking stoves: A systematic literature review." F1000Research 12, no. 38 (2023): 38.
4. Uddin, Md Wasi, and Najmus Saquib Sifat. "Comparative Study on Hydraulic and Thermal Characteristics of Minichannel Heat Sink With Different Secondary Channels In Parallel and Counter Flow Direction." International Journal of Thermofluids (2023): 100296.
5. Rabby, Md Insiat Islam, Siti Ujila Masuri, NMS Hassan, SK Mahafujur Rahman, Tazeen Afrin Mumu, and Mahfuz Alam. "Heat transfer through triangular corrugated pipe for laminar flow region by using nanofluids: a numerical study." Revista Română de Materiale/Romanian Journal of Materials 52, no. 4 (2022): 341-348.
6. Uddin, Md Wasi, Hassan Shahriar Ayon, Tahmid Mohammad Mehrab, and Najmus Saquib Sifat. "Evaluation of Hydraulic and Thermal Characteristics of Interconnected Parallel Flow Mini Heat Sink." In ASME International Mechanical Engineering Congress and Exposition, vol. 85673, p. V011T11A056. American Society of Mechanical Engineers, 2021.
7. Rabby, Md Insiat Islam, Farzad Hossain, SAM Shafwat Amin, Tazeen Afrin Mumu, MD Ashraf Hossain Bhuiyan, and A. K. M. Sadrul-Islam. "Convective heat transfer and power saving application of si based nanoparticles in a circular pipe." Latin American Applied Research-An international journal 50, no. 4 (2020): 321-327.
8. Rabby, Md Insiat Islam, Farzad Hossain, Afshana Morshed, Ayman Khan, Noor Mohammad, and AKM Sadrul Islam. "Effect of CuO-water nanofluid on laminar forced convection heat transfer in pipe flow." In AIP Conference Proceedings, vol. 2324, no. 1, p. 050005. AIP Publishing LLC, 2021.
9. RABBY, Md Insiat Islam, Farzad HOSSAIN, SAM Shafwat AMIN, and AKM Sadrul ISLAM. "Numerical simulation on performance evaluation among metal and oxide based nanofluids for power savings application of a circular tube." Journal of Thermal Engineering 7, no. 5 (2021): 1150-1162.
10. Rabby, Md Insiat Islam, S. A. M. Shafwat Amin, Sazedur Rahman, Farzad Hossain, Mohammad Ahnaf Shahriar, and A. K. M. Sadrul Islam. "Performance Comparison of Nanofluids in Laminar Convective Flow Region Through a Channel." In Advances in Materials and Manufacturing Engineering: Proceedings of ICAMME 2019, pp. 511-523. Springer Singapore, 2020.
11. Anik Sarker, Shaharear Md Emtiaz and Ashmita Roy Medha, “Numerical investigation of droplet impact on liquid pool under dc electric field using openfoam”, ICMERE-2021.
1. Ahmed, Razin, Victor Sreeram, Roberto Togneri, Amitava Datta, and Muammer Din Arif. "Computationally expedient Photovoltaic power Forecasting: A LSTM ensemble method augmented with adaptive weighting and data segmentation technique." Energy Conversion and Management 258 (2022): 115563.
2. Ahmed, Razin, V. Sreeram, Y. Mishra, and M. D. Arif. "A review and evaluation of the state-of-the-art in PV solar power forecasting: Techniques and optimization." Renewable and Sustainable Energy Reviews 124 (2020): 109792.
3. Chowdhury, Muhammad Ifaz Shahriar, Md Enamul Hoque, and Shek Md Atiqure Rahman. "CO2 Conversion to Chemicals and Fuel Cells Using Renewable Energy Sources." In 2D Nanomaterials for CO2 Conversion into Chemicals and Fuels, pp. 126-170. 2022.
4. Shan, ANM Nihaj Uddin, Md Zayed Mostafa, Arman Hossain, Mohmmad Shadman Sakib, and M. Monjurul Ehsan. "Thermal assessment and optimization of process fluids in transcritical organic and transcritical CO2 Rankine cycle for waste energy recuperating system." Energy Conversion and Management: X 15 (2022): 100258.
5. M. Nasir Uddin, Md. Humayun Kabir Bhuiyan, Dr. Golam Mostofa, ‘An Experimental Investigation of Long-Range Projectiles under Different Wind Conditions’, American Journal of Mechanical Engineering, 2021, Vol. 9, No. 1, 7-17.
1. Arit, Muammer Din, Md Asadur Rahman, Md Mahmudul Hague Milu, Abu Bakar Siddik, and Md Enamul Hogue. "Green Nanomaterials: Synthesis, Properties and Spectroscopic Applications." In Nanomaterials for Spectroscopic Applications, pp. 213-272. Jenny Stanford Publishing, 2021.
2. Chowdhury, Muhammad Ifaz Shahriar, Yashdi Saif Autul, and Md Enamul Hoque. "Free Vibration and Damping Properties of the Pineapple Leaf Fiber-and Sisal Fiber-Based Polymer Composites." In Vibration and Damping Behavior of Biocomposites, pp. 55-80. CRC Press, 2022.
3. Autul, Yashdi Saif, Rowfi Khan, Muhammad Ifaz Shahria Chowdhury, Md Enamul Hoque, and Suresh Sagadevan. "Synthesis of Two-dimensional Hybrid Materials, Unique Properties, and Challenges." In 2D Nanomaterials for CO2 Conversion into Chemicals and Fuels, pp. 64-125. 2022.
4. Chowdhury, Muhammad Ifaz Shahriar, Yashdi Saif Autul, Sazedur Rahman, and Md Enamul Hoque. "Polymer nanocomposites for automotive applications." In Advanced Polymer Nanocomposites, pp. 267-317. Woodhead Publishing, 2022.
5. Asif Ahmed, Nasim Iqbal, M S Kaiser and S Reaz Ahmed, “Thermo-Mechanical and Optical Characteristics of Cold Rolled Copper with Natural Melting Impurities”, American Institute of Physics (AIP) Conference Proceedings, 2324, 030017 (2021): Proceedings of the 13th International Conference on Mechanical Engineering, BUET, Bangladesh.
6. Patwary, M. F. F., Agarwala, I., Ahmed, R., & Das, D. K. (2021). “Experimental Study of Water Collection from Plume of an Induced-Draft Counter-Flow Cooling Tower Using Space Charge Injection.” In Mist International Journal of Science and Technology (MIJST) June 2021 (Volume: 9).
7. Hasan, M. H., Sagor, J. A., Agarwala, I. , (2021). “A systematic trend analysis of 3D printing techniques used in specific soft robotic elements.” Materials Today: Proceedings. Elsevier (In Press).