Publications by NAME Dept
The NAME Department of MIST maintains a strong research footprint through high-quality publications in maritime technology, ship design, dredging engineering, hydrodynamics and ocean sustainability, with faculty regularly publishing in indexed national and international journals. Ongoing research projects and student–faculty collaborations continue to expand the department’s publication volume each year, advancing knowledge that directly supports the nation’s marine sector. Papers published in Scopus and Web of Science indexed and peer reviewed journals are as follows:
2025
1. Munna, F.H., Uddin, M.M., 2025. CFD Analysis on Horizontal Axis Tidal Current Turbine. Journal of Research on Engineering Structures and Materials, Vol 11 (Issue 4), Pp 73-82 http://dx.doi.org/10.17515/resm2025-866en0503rs
2. Islam, A.H.M.R., Sarah, U.T., Zakaria, N.M.G., and Begum, S. 2025. “A Review on Assessment and Management of Occupational and Health Risks in the Shipbuilding Sector of Bangladesh”. MIST INTERNATIONAL JOURNAL OF SCIENCE AND TECHNOLOGY 13 (1), 37-47. https://doi.org/10.47981/j.mijst.13(01)2025.483(37-47).
3. Moon, M. H., Zaman, S. A., Hussain, M. D., Uddin, M.M., 2025. A Preliminary Assessment of Power Savings by Flettner Rotors Installed on a Cargo Ship. MIST International Journal of Science and Technology (MIJST), Vol 13 (Issue 1), Pp 73-82. https://doi.org/10.47981/j.mijst.13(01)2025.508(73-82)
4. Usham, S.M. and Mashfiha, F., Islam, M.T., Uddin, M.M. 2025. Numerical Investigation of Hydrodynamic Performance of a Symmetric Aerofoil in Openwater, Bangladesh Maritime Journal, Volume 9, Issue 1, Pp. 133–147
https://doi.org/10.70279/bmj-v8-1037
5. Hoque, T., Mahmud, S.M.I., 2025. Bridging S-N Method and Fracture Mechanics in Fatigue Evaluation of Fillet Welded T joints of an Oil Tanker. Naše More, International Journal of Maritime Science & Technology. 72, 57–68. https://doi.org/10.17818/nm/2025/2.3
6. Rabbi, M. H. R., Rahaman, M. A., Akter, F., Uddin, M.M., 2025. Investigation of electro-mechanical and corrosion behavior of leaded copper. Journal of Research on Engineering Structures and Materials, Vol 11 (Issue 4), Pp 73-82. http://dx.doi.org/10.17515/resm2025-767me0318rs
7. Mahmud, S.M.I., Hasan, N. and Hoque, M. E., 2025. Photorheological Fluids in Smart Systems, Smart Fluid Technologies: Springer Nature Link (Springer Cham, Engineering), Editors: Selim Gürgen, Chapter 5, pp 73-100, 1st Edition, ISBN 978-3-031-90405-9, https://doi.org/10.1007/978-3-031-90406-6
8. Mahmud, S.M.I., Hasan, N. and Hoque, M. E., 2025. Clay nanofiller-based elastomer nanocomposites: Preparation, characterization, and applications, Elastomer-Based Composites and Nanocomposites: Fundamentals, Recycling and Applications (Woodhead Publishing Series in Composites Science and Engineering), ELSEVIER, Chapter 8, ISBN 9780443188688, 1st Edition, DOI: https://doi.org/10.1016/C2022-0-01126-0
2024
1. Rahman, M.M., Chowdhury, R.H., Rafi, T.A., Ahmed, S.R., 2024. Corrosion Resistance of Scraped Copper in Velocity Varied Inland Water of Bangladesh. MJCSM 13, 25–35. https://doi.org/10.37934/mjcsm.13.1.2535
2. Abedin, J., Franklin, F., Mahmud, S.M.I., 2024. A Two-Stage Optimisation of Ship Hull Structure Combining Fractional Factorial Design Technique and NSGA-II Algorithm. JMSE 12, 411. https://doi.org/10.3390/jmse12030411
3. Hossain, M.T., Zaman, M., Sakib, S., Mahmud, S.M.I., 2024. Hazard Assessment of Rice Husk Ash Generated from Rice Mills in Bangladesh and Way Forward to Overcome or Adopt the Hazards. IOP Conf. Ser.: Mater. Sci. Eng. 1305, 012016. https://doi.org/10.1088/1757-899x/1305/1/012016
4. Abedin, J., Franklin, F., Mahmud, S.M.I., 2024. VALIDATION OF THE HULL GIRDER DEFLECTION OF A MULTIPURPOSE CARGO SHIP. AEJ 14, 183–193. https://doi.org/10.11113/aej.v14.21054
2023
1. Chowdhury, J.I., Faieq, A., Amin, O.M., 2023. Seakeeping analysis of a tanker with hard sail-based wind propulsion system in various seaways. Ocean Engineering 278, 114481. https://doi.org/10.1016/j.oceaneng.2023.114481
2. Rumi, M.J.U., Rahman, M.M., 2023. Prediction and optimization of heat treatment effects on hardness and electrical conductivity of aluminum composite reinforced with nano alumina based on response surface methodology. Res. Eng. Struct. Mater. https://doi.org/10.17515/resm2023.672ma0127
3. Rumi, M.J.U., Rahman, M.M., 2023. Effect of heat treatment on the hardness and electrical conductivity of aluminum composite reinforced with Al2O3 nanoparticles. Met. Sci. Hea. Tre. 7. 59–63. https://doi.org/10.30906/mitom.2023.7.59-63
4. Mijanur Rahman, M., Muzibur Rahman, M., 2023. Effect of laser cutting on mechanical performance of woven glass fiber reinforced plastic composites. Materials Today: Proceedings 80, 911–917. https://doi.org/10.1016/j.matpr.2022.11.327
5. Abedin, J., Franklin, F., Mahmud, S.M.I., 2023. Linear Longitudinal Strength Analysis of a Multipurpose Cargo Ship under Combined Bending and Torsional Load. JMSE 12, 59. https://doi.org/10.3390/jmse12010059
2022
1. Hussain, M.D., Karim, M.M., Sasaki, N., 2022. Numerical assessment of the scale effects on the propulsive performance of a ship with gate rudder system. Ocean Engineering 249, 110889. https://doi.org/10.1016/j.oceaneng.2022.110889
2. Rahman, M.M., Ahmed, S.R., 2022. Effects of work-hardening and post thermal-treatment on tensile behaviour of solder-affected copper. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 237, 981–1005. https://doi.org/10.1177/14644207221131878
3. Rahman, M.M., Ahmed, S.R., Kaiser, M.S., 2022. Corrosion Behavior of Work Hardened SnPb-Solder Affected Copper in the Bay of Bengal Water Environment. Advances in Materials Science and Engineering 2022, 1–14. https://doi.org/10.1155/2022/2513391
4. Islam, M.R., Barnil, A.S.H., Rahman, M.S. and Hossain, K.A., 2022. Applicability of Current Statutory Rules for Stability Requirements of Bangladesh Inland Passenger Vessels. Journal of Ship Research, 66(03), pp.219-230. https://doi.org/10.5957/JOSR.12210049
2021
1. Hussain, M.D., Amin, O.M., 2021. A Comprehensive Analysis of the Stability and Powering Performances of a Hard Sail–Assisted Bulk Carrier. J. Marine. Sci. Appl. 20, 426–445. https://doi.org/10.1007/s11804-021-00219-w
2. Rahman, M.M., Salin, A.S.M., Haque, M.R., Kaiser, M.S., Ahmed, S.R., 2021. Experimental investigation of thermo-mechanical properties of copper based marine propeller materials. AIP Conference Proceedings. https://doi.org/10.1063/5.0038082
3. Rahman, M.M., Ahmed, S.R., 2021. Dry Sliding Friction and Wear of SnPb-Solder Affected Copper against Stainless Steel Counter Surface. IJMSE 18. https://doi.org/10.22068/ijmse.2334
4. Uddin, M.M., Hossen, M.P., Jahan, M.M. and Islam, M. I., 2021. Structural Analysis of Composite Propeller of Ship Using FEM. AIP Journal, Published by the American Institute of Physics, 2324, 030001 (2021), Vol 2324 (Issue 1), Pp 393-398. https://doi.org/10.1063/5.0037760
5. Islam, M.R., Akib, M.H., Tabassum, F. and Hossain, K.A., 2021. On the investigation of wind generated waves in Bangladesh rivers for the assessment of stability requirements in Inland vessel design. Brodogradnja: An International Journal of Naval Architecture and Ocean Engineering for Research and Development, 72(3), pp.45-59. https://doi.org/10.21278/brod72304
6. Rahman, M.M., Ahmed, S.R., Kaiser, M.S., 2021. On the investigation of reuse potential of SnPb-solder affected copper subjected to work-hardening and thermal ageing. Materials Characterization 172, 110878. https://doi.org/10.1016/j.matchar.2021.110878
Up to 2020
1. RAHMAN, M.M., AHMED, S.R., KAISER, M.S., 2020. BEHAVIOR OF WORK HARDENED SnPb-SOLDER AFFECTED COPPER ON CORROSION RAISTANCE IN pH VARIED ENVIRONMENTS. EJMSE 5, 199–211. https://doi.org/10.36868/ejmse.2020.05.04.199
2. Rahman, M.M., Ahmed, S.R., 2020. Corrosion Behavior of Copper Based Heat Exchanger Tube in Waters of Bangladesh Region at Varied Temperature and Flow Velocity. MIST International Journal of Science and Technology 8, 15–23. https://doi.org/10.47981/j.mijst.08(02)2020.196(15-23)
3. Hassan, M.M., Hoque, T., Islam, M.R., 2019. THE NULL EFFECT OF CROSS SECTIONS OTHER THAN THE MAXIMUM PITTED CROSS SECTION ON STRENGTH REDUCTION OF AGED MARINE PLATES SUBJECTED TO UNIAXIAL TENSILE LOADING. MIJST, 7(1), 1-8.
4. Hussain, Md.D., Tuhin, Md.S., Kabir, S., Amin, O.M., 2018. Numerical investigation of the stability and power prediction of a sail based wind propulsion system for a cargo ship. AIP Conference Proceedings. https://doi.org/10.1063/1.5044374
5. Rahman, M.M., 2017. An Appraisal of Shipbuilding Prospects in Bangladesh. Procedia Engineering 194, 224–231. https://doi.org/10.1016/j.proeng.2017.08.139
6. Rahman, M.M., Kamol, R.S., Islam, R., 2017. Structural analysis of a ship on global aspect using ANSYS. AIP Conference Proceedings. https://doi.org/10.1063/1.5018526
7. Tanny, T.T., Akter, N., Amin, O.Md., 2017. Finite element analysis of container ship’s cargo hold using ANSYS and POSEIDON software. AIP Conference Proceedings. https://doi.org/10.1063/1.5018530
8. Rahman, M.M., Ahmad, S.R., 2017. Displacement potential solution of a guided deep beam of composite materials under symmetric three-point bending. AIP Conference Proceedings. https://doi.org/10.1063/1.5018519
9. Islam, M.R., Sakib-Ul-Alam, M., Nazat, K.K. and Hassan, M.M., 2017. Effect of analysis parameters on non-linear implicit finite element analysis of marine corroded steel plate. In AIP Conference Proceedings (Vol. 1919, No. 1, p. 020025). AIP Publishing LLC. https://doi.org/10.1063/1.5018543
10. Amin, O.M., Karim, Md.A., Saad, A.H., 2017. Development of a highly maneuverable unmanned underwater vehicle on the basis of quad-copter dynamics. AIP Conference Proceedings. https://doi.org/10.1063/1.5018527
11. Uddin, M.M., Fuad, M.E.Z., Rahaman, M.M. and Islam, M.R., 2017. Computational analysis of water entry of a circular section at constant velocity based on Reynold’s averaged Navier-Stokes method. In AIP Conference Proceedings (Vol. 1919, No. 1, p. 020039). AIP Publishing LLC. https://doi.org/10.1063/1.5018557
12. Mahmud, S.M.I., Razib, A.H., Rahman, Md.R.R., 2017. Transitional behaviour of thickness effects in shipbuilding materials (MS plate). AIP Conference Proceedings. https://doi.org/10.1063/1.5018563
13. Rashid, C.K. and Islam, M.R., 2017, December. Reasons and remedies of inland passenger vessels accidents in Bangladesh. In AIP Conference Proceedings (Vol. 1919, No. 1, p. 020036). AIP Publishing LLC. https://doi.org/10.1063/1.5018554
14. Rahman, M.M., Mridha, A.H.Y., Ahsan, K.S., 2017. Propulsive machinery selection for repowering of an old patrol craft – A case study. AIP Conference Proceedings. https://doi.org/10.1063/1.5018545
15. Islam, M.R., Rahaman, M.D. and Degiuli, N., 2015. Investigation of the causes of maritime accidents in the inland waterways of Bangladesh. Brodogradnja: An International Journal of Naval Architecture and Ocean Engineering for Research and Development, 66(1), pp.12-22. https://doi.org/10.21278/BROD72304