Department of Aeronautical Engineering (AE)

Md Jalal Uddin Rumi

Assistant Professor, Department of Aeronautical Engineering (AE)

Educational Qualification:

1.  Degree: B.Sc. in Aeronautical Engineering, Department of Aeronautical Engineering, Military Institute of Science & Technology, Dhaka, Bangladesh.

·Thesis Topic: Design and Fabrication of Lunar Dust Excavator Robot

2.  Degree: M.Sc. in Aeronautical Engineering, Department of Aeronautical Engineering, Military Institute of Science & Technology, Dhaka, Bangladesh.

·Thesis Topic: Influence of Heat Treatment on Electro-mechanical Properties of Aluminum Composites

Academic Experience: Assistant Professor (15th Apr 2020 - Present), Department of Aeronautical Engineering, Military Institute of Science and Technology. Core Duties and Responsibilities: Conduct undergraduate courses and actively participate in research, training, and seminars.

Industry Experience:

1. Borescope Inspector (31st July 2019 – 14th Apr 2020), Continuing Airworthiness Management, NOVOAIR Limited. Core Duties and Responsibilities: Perform inspection of Aircraft engine modules such as Hot section and cold section degradation due to their operation at high-temperature/extreme environments.

2. In charge of Continuing Airworthiness Management (18th Sept 2013 – 14th Apr 2020), NOVOAIR Limited. Core Duties and Responsibilities: Perform Aircraft and Engine maintenance for re-certification.

Software Skills:  ABAQUS, MATLAB, DESIGN EXPERT, ORIGIN PRO, MINITAB, SOLID WORKS, MICROSOFT OFFICE, etc.

Academic Research Interest: Synthesis of Metallic Materials through Additive Manufacturing, Mechanical and Microstructural Characterization of Metallic Materials at High Temperature/Extreme Environments.

Academic Teaching Experience:

·AEAS 331, Material Science & Aerospace Materials (3rd Year Undergrad)

·AEAS 206, Mechanics of Solids (2nd Year Undergrad)

·AEAS 207, Thermodynamics (2nd Year Undergrad)

·AEAS 419, Maintenance Management and Repair of Aircraft (4th Year Undergrad)

·AEAS 455, Human Performance and Limitations (4th Year Undergrad)

·AEAS 425, Pressurization and Air Conditioning Systems (4th Year Undergrad)

Academic Research Grants:

1.      Principal investigator on a research grant of FY 2022-2023 “Investigation on Electro-mechanical properties and Thermal treatment effect of Al MMCs fabricated with Nano Reinforced Al2O3, ZnO, SiC and Activated Carbon by multistage stir casting method for Aerospace applications” funded by Research and Development, Military Institute of Science and Technology. https://mist.ac.bd/page/research-grant-2022-2023-ap-md-jalal

2.      Co-principal investigator on a research grant of FY 2022-2023 “Development and Application of tools coated with Physical Vapour Deposition (PVD)” funded by Research and Development, Military Institute of Science and Technology. https://mist.ac.bd/page/research-grant-2022-2023-dr-nurul-amin

International Guest Lecture:

1.      Guest lecture delivered on Life Cycle Costing of Aircraft Maintenance and Repair Management organized by the Department of Aeronautical Engineering of GNA University, India, Nov 2021.

Academic Supervision and Mentorship:

1.      Faculty Advisor of an undergraduate team of the Aeronautical Engineering department participated in the Annual Design/Build/Fly Competition arranged by AIAA 2021 and 2023.

2.      Faculty Advisor of an undergraduate team of the Aeronautical Engineering department participated in the Light Aircraft Design Competition 2022/2023 organized by The Royal Aeronautical Society (RAeS), UK.

3.      Supervisor and Mentor of 04 undergraduate groups having 12 students actively participating in joint research collaboration with Industrial Production Engineering of MIST and Helmut-Schmidt-University (Germany).

Journal/Conference and External Advisory Services:

1.      Section Editor of International Conference on Mechanical Engineering and Applied Sciences (ICMEAS 22), Dhaka, Bangladesh.

2.      Advisory board member for 2023 of the International Journal of Research on Engineering Structures and Materials (RESM), MIM Research Group, Turkey.

3.      External advisor for a techno-financial committee of Biman Bangladesh Airlines for selection of Aircraft for short-term leasing in 2022.

Honors And Awards:

1.      Best Presented Paper award for “Progressive Failure Analysis of Carbon Fiber Reinforced Polymer Composite with a Circular Notch by varying Fiber Orientation” at 2nd International Conference on Mechanical Engineering and Applied Sciences, Bangladesh.

2.      NASA’s 3rd and 4th Annual Lunabotics Mining Competition 2012 and 2013, Kennedy Space Center, Florida, U.S.A. and securing awards in Outreach project: 1stLuna worldwide award: 1stJoe Cosmo Excellence: 6thSystem Engineering Paper: 2nd, Team spirit: 3rdLunar Regolith Mining: 11th.

Journal Articles (2023):

1.      Md Jalal Uddin Rumi, Muhammad Muzibur Rahman (2023). Prediction and Optimization of Heat Treatment Effects on Hardness and Electrical Conductivity of Aluminum Composite Reinforced with nano Alumina Based on Response Surface Methodology, (Published online in International Journal of Research on Engineering Structures and Materials, RESM). DOI: http://dx.doi.org/10.17515/resm2023.672ma0127

2.      Sinthea Khatun, AKM Nurul Amin, Mamunur Rashid Mashuk, Noshin Tasnim Tuli, Ismat Jerin, M.S. Bashar, Md Jalal Uddin Rumi (2023). Parameter Optimization and Surface Integrity Aspects in MWCNT-Based Nano-PMEDM Process of Inconel 718 (International Journal of Research on Engineering Structures and Materials, RESM) http://dx.doi.org/10.17515/resm2023.18ma0530rs

3.      Md Jalal Uddin Rumi, Muhammad Muzibur Rahman (2023). Characterization on Specific Wear Rate of Al Composite Reinforced with nanoAl2O3 Using Taguchi’s Technique, TRIBOLOGIA - Finnish Journal of Tribology 1-2 vol 40/2023. https://doi.org/10.30678/fjt.125959

4.      Md Jalal Uddin Rumi, Muhammad Muzibur Rahman (2023). Effect of Heat Treatment on Hardness and Electrical Conductivity of nano Al2O3 reinforced Al MMC (Published online in Russian journal version of Metal Science and Heat Treatment journal, Springer). DOI: https://doi.org/10.30906/mitom.2023.7.59-63

5.      Md Jalal Uddin Rumi, Muhammad Muzibur Rahman (2023). Influence of Alumina and Zinc Oxide Nanoparticles on Microstructure and Electro-Mechanical Properties of Aluminum Metal Matrix Composites Fabricated by Customized Two-Step Stir Casting Method (Published online in International Journal of Research on Engineering Structures and Materials, RESM). DOI: http://dx.doi.org/10.17515/resm2023.729ma0404

6.      Md Jalal Uddin Rumi, Arifin Ahmed Sarker, Nafisa Maliyat, Nuzhat Kabir, Sabera Hoque (2023). Fabrication of Aluminum Metal Matrix Composites with Al 6063 Reinforced with Al2O3 by Two Step Stir Casting Method for Investigation of Mechanical Properties (Accepted and in press).

7.      AKM Nurul Amin, Md Omar Al Javed, Zayed Ur Rahman, Md Shahriar Habib, Sinthea Khatun, Md Jalal Uddin Rumi (2023). Comparison of the Efficiency of Coated and Uncoated Carbide Tools in Ductile Mode End Milling of Soda-lime Glass (Under peer review).

Conference Proceedings:

1.      Aquib Bin Yousuf, Sajjid Hasan Asif, Kamrul Hasan, Md Jalal Uddin Rumi (2022). Progressive Failure Analysis of Carbon Fiber Reinforced Polymer Composite with a Circular Notch by Varying Fiber Orientation”, 2nd International Conference on Mechanical Engineering and Applied Sciences, Bangladesh.

2.      Md Jalal Uddin Rumi, Md Abdus Salam, Bhuiyan Shameem Mahmood Ebna Hai (2013). Design and Fabrication of Lunar Dust Excavator Robot, ASME 2013 International Mechanical Engineering Congress and Exposition, Volume 12: Systems and Design, pp.V012T13A05, San Diego, California, USA. DOI: 10.1115/IMECE2013-64543.

Major Industrial Experience:

1.      Induction of EMB 145 EU and ATR 72-212A type aircraft from the UK, Uruguay, and New Zealand.

2.      Overhaul and Repair Management for Aero-engine from Rolls Royce (UK) & Pratt & Whitney (Canada & Singapore), the Landing gear of ATR 72-212A fleet from Aviatechnik (Canada) & RUAG (Switzerland).

3.      Overhaul management for Hub and propeller blade of ATR 72-212A from APS (USA) and (Ratier) France.

4.      Project coordination of major base maintenance (C check, 4YR-12YR, 36000 FC inspection) and painting of ATR 72-212A at different foreign MROs from the UK, Vietnam, Indonesia, India, and Malaysia.

Selected Professional Training:

1.      Supersonic Wind Tunnel AF302 by Tec-Quipment Ltd, UK, August 2023.

2.      Engine Borescope Inspection by Flight Safety International, Singapore, March 2019.

3.      Engine Condition Trend Monitoring by Flight Safety International, Singapore, January 2019.

4.      Human Performance & Limitations by Aeronautical Institute of Bangladesh, February 2015.

5.      Type training on ATR 72-212A by HOP! Air France, May 2016.

Volunteer/Community Services:

Active involvement in numerous social welfare initiatives with Foundation InterVida Bangladesh, an international non-governmental organization (NGO) committed to eradicating illiteracy in rural Bangladesh, demonstrates my commitment to my country's socioeconomic development and mass literacy.